Maintaining a car regularly can save money on future repairs. Do not neglect car maintenance that might sound simple, such as changing oil, checking tire pressure, caring for batteries, engine maintenance, and others.
These maintenance tips apply to all types of cars, whether old cars that are rarely used or new cars that are black or white.
Tips for Caring Routinely to Stay Durable
What you have to do, and when you have to do it, is probably the subject. Let me explain, this car maintenance applies to any type of car.
1. Check tire pressure
Checking tire pressure should be ideally done every week because of the tire section Aff comfort and handling. Car manuals usually have tire pressure recommendations for your vehicle.
2. Check the Depth of the Site
You need a tire that can function in all weather conditions, be it dry, wet. This is where the tire tread comes into play. If you look at your tires, you will see a tread pattern with wider contact patches to give you a more versatile rubber.
3. Rotate the Tires and Check the Alignment
Wheel balancing and alignment are important aspects of car maintenance because they include driving comfort and safety. It is therefore very important to check that your tires are balanced, and aligned according to the mileage shown in your owner’s manual.
4. Clean Your Wheel Brake Dust
Dust sticking to the brakes makes your wheels a little uncomfortable, it’s important to clean dust from your wheels with a wet sponge.
5. Check the Driving Belt
The function of the drive belt is to transfer power from your cam or crankshaft to the car’s alternator, AC compressor, power steering pump, air pump, water pump, and other devices that depend on engine power. It is important to inspect this drive belt from time to time to check for visible damage or changes in its integrity.
You need to look at the integrity of your serpentine belt or your V-belt and timing belt (unless your engine is driven by a chain). You also need to know the difference between the three.
6. Check Your Car Oil Level
Checking your engine oil level becomes a routine part of car maintenance. It is very easy. Simply find where the oil dipstick is, pull out, and evaluate the oil. A dipstick usually has an indicator near the end. There can be two notches or even points marked by H and L.
In some vehicles, the area between these two points is also shaded or equipped with a pattern to allow for easier assessment. Make sure that the oil level you are using is in these two points. It’s important to see the color of the oil. Engine oil that is still good is usually yellow. Dark oil usually shows the presence of contaminants, excessive heat, the addition of chemical additives or worst, mud.
7. Check the Engine Coolant (Radiator) Level
Radiator in a car engine has a role to keep the engine temperature cool, the radiator is a component that serves to keep the engine from getting hot quickly. You need to check the coolant level of your engine before you even start out using your vehicle.
8. Change the Engine Air Filter
The efficient operation of your engine relies heavily on an excellent mixture of air and fuel. It is very important to ensure that the air that is sucked into the engine of your car does not contain debris, particles that can damage the operation of the engine. Your machine can also jam in some cases. It is for this reason that your engine air filter must be replaced according to your vehicle manufacturer’s recommendations.
9. Change the Spark Plug
Other symptoms of a broken spark plug can include lack of acceleration, difficulty starting your vehicle, and wasteful gasoline. Ideally, you need to replace your spark plugs after every 30,000 miles if it is the standard copper type. However, if yours is a more advanced iridium spark plug, then this can last up to 100,000 miles.
10. Proper Octane Value
There is the idea that higher octane fuel means more power. Well, technically, this is true. But you have to understand how this happens.
Octane Value is a number that shows the amount of pressure that can be applied before fuel (perlite, Pertamax, diesel, premium, etc.) spontaneously ignites. The higher the octane value, the slower the fuel burns. The benefit of your vehicle engine is that combustion leaves no residue on the engine that can interfere with its performance.
11. Know-How to Remove the Car Battery Correctly
Always disconnect the negative terminal first to help prevent the possibility of an electrical short circuit. This effectively cuts the path back from the electric current. if you break the positive terminal first, the current is still moving pretty much along the negative terminal. Removing the negative end from the connector first will help prevent a short circuit.
12. Replace the Damaged Indicator Light
Car headlights are very important, so they shouldn’t be ignored in your car’s maintenance checklist. Indicator or signal lights inform other drivers about the direction you are going. In this way, they will also know what to do. It is important to only use the type of light bulb that is specific to your vehicle according to the vehicle’s manual.
13. Don’t touch the glass ball when changing lights
The reason is quite simple: You don’t want to transfer all the oil, dirt, dust, and dirt at your fingertips to the bulb because this is produced with a special coating on the exterior surface of the bulb.
14. Replacing the Windshield Wipers
These wipers are not very durable so they tend to wear out a little faster than other components of your car. If your windshield creaks every time you turn it on, it’s time to replace it.
15. Change the Cabin Air Filter
This is one of the easiest and most practical ways to keep everyone safe and comfortable in the cabin of your car. The current recommendation is to replace your cabin air filter every 12 months or every 12,000 miles.